Tamiya 1:350 British Battleship Prince of Wales

[gaz45]

This is what i plan to build for this SIG

[DBMiller]

Wow! That would take me about 12 years!

[wookiee76]

Sir i either salute you or call you a nutter!

[rodrant]

Nice !

Good luck with the build !

[pourquoi61]

Will this be out the box or with add-ons, weathered or mint condition? Which ever way you do it, it will be very nice.

[gaz45]

Will this be out the box or with add-ons, weathered or mint condition? Which ever way you do it, it will be very nice.

It will be out of the box as for any weathering it depends if have time

[d6mst0]

Great looking ship. Looking forward to seeing it come together.

[Willem]

Cool choice. Was eyeing this kit up in a branch of Hobbycraft but, unfortunately the other half caught me and gave me that "look".

Look forward to your build mate.

[gaz45]

Cheers mate that's where I got it from

[gaz45]

Right lets see whats in the box

































Some very nice detail for a 1985 kit with very little clean up required

[gaz45]

Here comes the history part

HMS Prince of Wales was a King George V-class battleship of the Royal Navy, built at the Cammell Laird shipyard in Birkenhead, England. She was involved in several key actions of the Second World War, including the battle of Denmark Strait against the German battleship Bismarck, operations escorting convoys in the Mediterranean, and her final action and sinking in the Pacific in 1941.
Prince of Wales had an extensive battle history, first seeing action in August 1940 while still being outfitted in her drydock, being attacked and damaged by German aircraft. Her brief but storied career ended 10 December 1941, when Prince of Wales and battlecruiser HMS Repulse became the first capital ships to be sunk solely by air power on the open sea, a harbinger of the diminishing role this class of ships was subsequently to play in naval warfare. The wreck lies upside down in 223 feet (68 m) of water, near Kuantan, in the South China Sea.

Construction
In the aftermath of the First World War, the Washington Naval Treaty was drawn up in 1922 in an effort to stop an arms race developing between Britain, Japan, France, Italy and the United States. This treaty limited the number of ships each nation was allowed to build and capped the tonnage of all capital ships at 35,000 tons. These restrictions were extended in 1930 through the Treaty of London, however, by the mid-1930s Japan and Italy had withdrawn from both of these treaties, and the British became concerned about a lack of modern battleships within their navy. As a result, the Admiralty ordered the construction of a new battleship class: the King George V class. Due to the provisions of both the Washington Naval Treaty and the Treaty of London, both of which were still in effect when the King George Vs were being designed, the main armament of the class was limited to the 14-inch (356 mm) guns prescribed under these instruments. They were the only battleships built at that time to adhere to the treaty, and even though it soon became apparent to the British that the other signatories to the treaty were ignoring its requirements, it was too late to change the design of the class before they were laid down in 1937.
Prince of Wales was originally named King Edward VIII but upon the abdication of Edward VIII the ship was renamed even before she had been laid down. This occurred atCammell Laird's shipyard in Birkenhead on 1 January 1937, although it was not until 3 May 1939 that she was launched. She was still fitting out when war was declared in September, causing her construction schedule, and that of her sister, King George V, to be accelerated. Nevertheless, the late delivery of gun mountings caused delays in her outfitting.
During early August 1940, while she was still being outfitted and was in a semi-complete state, Prince of Wales was attacked by German aircraft. One bomb fell between the ship and a wet basin wall, narrowly missing a 100-ton dockside crane, and exploded underwater below the bilge keel. The explosion took place about six feet from the ship's port side in the vicinity of the after group of 5.25-inch guns. Buckling of the shell plating took place over a distance of 20 to 30 feet (9.1 m), rivets were sprung and considerable flooding took place in the port outboard compartments in the area of damage, causing a ten-degree port list. The flooding was severe, due to the fact that final compartment air tests had not yet been made and the ship did not have her pumping system in operation.
The water was pumped out through the joint efforts of a local fire company and the shipyard, and Prince of Wales was later dry docked for permanent repairs. This damage and the problem with the delivery of her main guns and turrets delayed her completion. As the war progressed there was an urgent need for capital ships, and so her completion was advanced by postponing compartment air tests, ventilation tests and a thorough testing of her bilge, ballast and fuel-oil systems.

Description
Main article: King George V-class battleship (1939)
Prince of Wales displaced 36,727 long tons (37,300 t) as built and 43,786 long tons (44,500 t) fully loaded. The ship had an overall length of 745 feet (227.1 m), a beam of 103 feet (31.4 m) and a draught of 29 feet (8.8 m). Her designed metacentric height was 6 feet 1 inch (1.85 m) at normal load and 8 feet 1 inch (2.46 m) at deep load.
She was powered by Parsons geared steam turbines, driving four propeller shafts. Steam was provided by eight Admiralty boilers which normally delivered 100,000 shaft horsepower (75,000 kW), but could deliver 110,000 shp (82,000 kW) at emergency overload.[N 1] This gave Prince of Wales a top speed of 28 knots (52 km/h; 32 mph).The ship carried 3,542 long tons (3,600 t) of fuel oil.She also carried 180 long tons (200 t) of diesel oil, 256 long tons (300 t) of reserve feed water and 444 long tons (500 t) of freshwater.[11] During full power trials on 31 March 1941, Prince of Wales at 42,100 tons displacement achieved 28 knots with 111,600 shp at 228 rpm and a specific fuel consumption of 0.73 lb per shp.Prince of Wales had a range of 3,100 nautical miles (5,700 km; 3,600 mi) at 27 knots (50 km/h; 31 mph).
Armament
Prince of Wales mounted 10 BL 14-inch (356 mm) Mk VII guns. The 14-inch guns were mounted in one Mark II twin turret forward and two Mark III quadruple turrets, one forward and one aft. The guns could be elevated 40 degrees and depressed 3 degrees. Training arcs were: turret "A", 286 degrees; turret "B", 270 degrees; turret "X", 270 degrees. Training and elevating was done by hydraulic drives, with rates of two and eight degrees per second, respectively. A full gun broadside weighed 15,950 pounds (7,230 kg), and a salvo could be fired every 40 seconds.[13] The secondary armament consisted of 16 QF 5.25-inch (133 mm) Mk I guns which were mounted in eight twin mounts, weighing 81 tons each.The maximum range of the Mk I guns was 24,070 yards (22,009.6 m) at a 45-degree elevation, the anti-aircraft ceiling was 49,000 feet (14,935.2 m). The guns could be elevated to 70 degrees and depressed to 5 degrees.[15] The normal rate of fire was ten to twelve rounds per minute, but in practice the guns could only fire seven to eight rounds per minute.[14] Along with her main and secondary batteries, Prince of Wales carried 32 QF 2 pdr (1.575-inch, 40.0 mm) Mk.VIII "pom-pom" anti-aircraft guns. She also carried 80 UP projectors, which were short range rocket firing anti-aircraft weapons used extensively in the early days of the Second World War by the Royal Navy.


History of operation
Action with Bismarck
Main article: Battle of the Denmark Strait
On 22 May 1941, Prince of Wales, the battlecruiser Hood and six destroyers were ordered to take station south of Iceland and intercept the German battleship Bismarck if she attempted to break out into the Atlantic. CaptainJohn Leach knew that main-battery breakdowns were likely to occur, since Vickers Armstrongs technicians had already corrected some that took place during training exercises in Scapa Flow. These technicians were personally requested by the captain to remain aboard. They did so and played an important role in the resulting action.
The next day Bismarck, in company with the heavy cruiser Prinz Eugen, was reported heading south-westward in the Denmark Strait. At 20:00 Vice-Admiral Lancelot Holland, in his flagship Hood, ordered the force to steam at 27 knots, which it did most of the night. His battle plan called for Prince of Wales and Hood to concentrate on Bismarck, while the cruisers Norfolk and Suffolk would handle Prinz Eugen. However the two cruisers were not informed of this plan because of strict radio silence. At 02:00, on 24 May, the destroyers were sent as a screen to search for the German ships to the north, and at 02:47 Hood and Prince of Wales increased speed to 28 knots and changed course slightly to obtain a better target angle on the German ships. The weather improved, with ten-mile (16 km) visibility, and crews were at action stations by 05:10.
At 05:37 an enemy contact report was made, and course was changed to starboard to close range. Neither ship was in good fighting trim. Hood, designed twenty-five years earlier, lacked adequate horizontal protection and would have to close the range quickly, as she would become progressively less vulnerable to plunging shellfire at shorter ranges. She had completed an overhaul in March and her crew had not been adequately retrained. Prince of Wales, with thicker armour, was less vulnerable to 15-inch shells at ranges greater than 17,000 feet (5,200 m), but her crew had also not been trained to battle efficiency. The British ships made their last course change at 05:49, but they had made their approach too fine (the German ships were only 30 degrees on the starboard bow) and their aft turrets could not fire. Prinz Eugen, with Bismarck astern, had the Prince of Wales and Hood slightly forward of the beam, and both ships could deliver full broadsides.
At 05:53, despite seas breaking over the bows, Prince of Wales opened fire on Bismarck at 26,500 yards.[18] There was some confusion among the British as to which ship was Bismarck and thirty seconds earlier Hood had mistakenly opened fire on Prinz Eugen as the German ships had similar profiles. Hood's first salvo straddled the enemy ship, but Prinz Eugen, in less than three minutes, scored 8-inch-shell hits on Hood. The first shots by Prince of Wales – two three-gun salvoes at ten second intervals – were 1,000 yards over.[17] The turret rangefinders on Prince of Wales could not be used because of spray over the bow and fire was instead directed from the 15-foot (4.6 m) rangefinders in the control tower.
The sixth, ninth and thirteenth salvos were straddles and two decisive hits were made on Bismarck. One shell holed her bow and caused Bismarck to lose 1,000 tons of fuel oil, mostly to salt-water contamination. The other fell short, and entered Bismarck below her side armour belt, the shell exploded and flooded the auxiliary boiler machinery room and forced the shutdown of two boilers due to a slow leak in the boiler room immediately aft. The loss of fuel and boiler power were decisive factors in the Bismarck's decision to return to port. In Prince of Wales, "A1" gun ceased fire after the first salvo due to a defect. Sporadic breakdowns occurred until the decision to turn away was made, and during the turn "Y" turret jammed.
Both German ships initially concentrated their fire on Hood and destroyed her with salvoes of 8- and 15-inch shells. An 8-inch shell hit the boat deck and struck a ready service locker for the UP rocket projectors, and a fire blazed high above the first superstructure deck. At 05:58 at a range of 16,500 yards, the force commander ordered a turn of 20 degrees to port to open the range and bring the full battery of the British ships to bear on Bismarck. As the turn began, Bismarck straddled Hood with her third and fourth four-gun salvoes and at 06:01 the fifth salvo hit her, causing a large explosion. Flames shot up near Hood's masts, then an orange-coloured fireball and an enormous smoke cloud obliterated the ship. On Prince of Wales, it seemed that Hood collapsed amidships, and the bow and stern could be seen rising as she rapidly settled. Prince of Wales made a sharp starboard turn to avoid hitting the debris and in doing so further closed the range between her and the German ships. In the four-minute action, Hood, the largest battlecruiser in the world, had been sunk. 1,419 officers and men were killed. Only three men survived.
Prince of Wales fired unopposed until she began a port turn at 05:57, when Prinz Eugen took her under fire. After Hood exploded at 06:01, the Germans opened intense and accurate fire on Prince of Wales, with 15-inch, 8-inch and 5.9-inch guns. A heavy hit was sustained below the waterline as Prince of Wales manoeuvred through the wreckage of Hood. At 06:02, a 15-inch shell struck the starboard side of the compass platform and killed the majority of the personnel there. The navigating officer was wounded, but Captain Leach was unhurt. Casualties were caused by the fragments from the shell's ballistic cap and the material it dislodged in its diagonal path through the compass platform. A 15-inch diving shell penetrated the ship's side below the armour belt amidships, failed to explode and came to rest in the wing compartments on the starboard side of the after boiler rooms. The shell was discovered and defused when the ship was docked at Rosyth.
At 06:05 Captain Leach decided to disengage and laid down a heavy smokescreen to cover Prince of Wales's escape. Following this, Leach radioed the Norfolk that the Hood had been sunk and then proceeded to join theNorfolk roughly 15 to 17 miles astern of the Bismarck. Throughout the day the British ships continued to chase the Bismarck until at 18:16 when Suffolk sighted the Bismarck at 22,000 yards. Prince of Wales then proceeded to open fire on Bismarck at an extreme range of 30,300 yards, she fired twelve salvos but owing to the range all of them missed. At 01:00 on 25 May Prince of Wales once again regained contact and proceeded to open fire at a radar range of 20,000 yards, after observers believed that she had scored a hit on Bismarck, Prince of Wales's "A" turret temporarily jammed, leaving her with only six operational guns. After losing the Bismarck owing to poor visibility and after searching for twelve hours, Prince of Wales headed for Iceland and would take no further part in actions against the Bismarck.
Atlantic Charter meeting

Prince of Wales off Newfoundland, 10–12 August 1941, after bringing Prime Minister Winston Churchill across the Atlantic to meet with President Franklin D. Roosevelt for the Atlantic Charter Conference
Following repairs at Rosyth, Prince of Wales transported Prime Minister Winston Churchill across the Atlantic for a secret conference with US President Franklin D. Roosevelt. On 5 August Roosevelt boarded the cruiser USS Augusta from the presidential yacht Potomac. Augusta proceeded from Massachusetts to Placentia Bay and Argentia in Newfoundland in company with the cruiser USS Tuscaloosa and five destroyers, arriving on 7 August while the presidential yacht played a decoy role by continuing to cruise New England waters as if the President were still on board. On 9 August Winston Churchill arrived in the bay aboard Prince of Wales, escorted by the destroyers HMS Ripley, HMCS Assiniboine andHMCS Restigouche. At Placentia Bay, Newfoundland, Roosevelt transferred to the destroyer USS McDougal to meet Winston Churchill on board Prince of Wales. The conference continued from 10 to 12 August aboard the heavy cruiser USS Augusta, and at the end of the conference, the Atlantic Charter was proclaimed.Following the declaration of the charter,Prince of Wales arrived back at Scapa Flow on 18 August.


In September following the meeting with President Roosevelt Prince of Wales was assigned to Force H, in the Mediterranean. On 24 September Prince of Wales formed part of Group II, led by Vice-Admiral Alban Curteis and consisting of the battleships Prince of Wales and Rodney, the cruisers Kenya, Edinburgh, Sheffield and Euryalus, and twelve destroyers. The force provided an escort for Operation Halberd, a supply convoy from Gibraltar to Malta.On 27 September the convoy was attacked by Italian aircraft, with Prince of Wales shooting down several with her 5.25-inch (133 mm) guns.[9] Later that day there were reports that units of the Italian Fleet were approaching. Prince of Wales, the battleship Rodney and the aircraft carrier Ark Royal were despatched to intercept, but the search proved fruitless. The convoy arrived in Malta without further incident, and Prince of Wales returned to Gibraltar, before sailing on to Scapa Flow, arriving there on 6 October.
Far East
Main article: Sinking of Prince of Wales and Repulse
On 25 October Prince of Wales and a destroyer escort left home waters bound for Singapore, there to rendezvous with the battlecruiser Repulse and the aircraft carrier Indomitable. Indomitable however ran aground off Jamaicaa few days later and was unable to proceed. Calling at Freetown and Cape Town South Africa to refuel and generate publicity, Prince of Wales also stopped in Mauritius and the Maldive Islands. Prince of Wales reachedColombo, Ceylon, on 28 November, joining Repulse the next day. On 2 December the fleet docked in Singapore.Prince of Wales then became the flagship of Force Z, under the command of Vice-Admiral Sir Tom Phillips.

Prince of Wales (left, front) andHMS Repulse (left, behind) under Japanese air attack on 10 December 1941. The destroyer in the foreground is HMS Express.
Japanese troop convoys were first sighted on 6 December. Two days later, Japanese aircraft raided Singapore; although the Prince of Wales's anti-aircraft batteries opened fire, they scored no hits and had no effect on the Japanese aircraft. A signal was received from the Admiralty in London ordering the British squadron to commence hostilities, and that evening, confident that a protective air umbrella would be provided by the RAF presence in the region, Admiral Phillips set sail. Force Z at this time comprised the battleship Prince of Wales, the battlecruiser Repulse, and the destroyers Electra, Express, Tenedos and HMAS Vampire.
The object of the sortie was to attack Japanese transports at Kota Bharu, but in the afternoon of 9 December the Japanese submarine I-56 spotted the British ships, and in the evening they were detected by Japanese aerial reconnaissance. By this time it had been made clear that no RAF fighter support would be forthcoming. At midnight a signal was received that Japanese forces were landing at Kuantan in Malaya. Force Z was diverted to investigate. At 02:11 on 10 December the force was again sighted by a Japanese submarine and at 08:00 arrived off Kuantan, only to discover that the reported landings were a diversion.

Prince of Wales in first torpedo attack
At 11:00 that morning the first Japanese air attack began. Eight Type 96 "Nell" bombers dropped their bombs close to Repulse, one passing through the hangar roof and exploding on the 1-inch plating of the main deck below. The second attack force, comprising seventeen "Nells" armed with torpedoes, arrived at 11:30, divided into two attack formations. Despite reports to the contrary, Prince of Wales was struck by only one torpedo, although this was enough to prove fatal, (while Repulse avoided the seven torpedoes aimed at her, as well as bombs dropped by six other "Nells" a few minutes later).
The torpedo struck Prince of Wales on the port side aft, abaft "Y" Turret, wrecking the outer propeller shaft on that side and destroying bulkheads to one degree or another along the shaft all the way to B Engine Room. This caused rapid uncontrollable flooding and put the entire electrical system in the after part of the ship out of action. Lacking effective damage control, she soon took on a heavy list.
A third torpedo attack developed against Repulse and once again she avoided taking any hits.
A fourth attack, conducted by torpedo-carrying Type 1 "Bettys", developed. This one scored hits on Repulse and she sank at 12:33. Six aircraft from this wave also attacked Prince of Wales, hitting her with three torpedoes,causing further damage and flooding. Finally, a 500-kilogram (1,100 lb) bomb hit Prince of Wales's catapult deck, penetrated to the main deck, where it exploded, causing many casualties in the makeshift aid centre in the Cinema Flat. Several other bombs from this attack scored very 'near misses', indenting the hull, popping rivets and causing hull plates to 'split' along the seams and intensifying the flooding. At 13:15 the order to abandon ship was given, and at 13:20 Prince of Wales capsized and sank; Vice-Admiral Phillips and Captain Leach were among the 327 fatalities.
Aftermath


Prince of Wales and Repulse were the first capital ships to be sunk solely by naval air power on the open sea (albeit by land-based rather than carrier-based aircraft), a harbinger of the diminishing role this class of ships was to play in naval warfare thereafter. It is often pointed out, however, that a contributing factor to the sinking of Prince of Wales was her surface-scanning radar being inoperable, depriving Force Z of one of its most potent early-warning devices and the early critical damage she sustained from the first torpedo. Another factor which led to Prince of Wales's demise was the additional loss of dynamos, depriving Prince of Wales of many of her pumps. Further electrical failures left parts of the ship in total darkness and added to the difficulties of her damage repair parties as they attempted to counter the flooding.The sinking was the subject of an inquiry chaired by Mr. Justice Bucknill, but the true causes of the ship's loss were only established when divers examined the wreck after the war. The Director of Naval Construction's report on the sinking claimed that the ship's anti-aircraft guns could have "inflicted heavy casualties before torpedoes were dropped, if not preventing the successful conclusion of attack had crews been more adequately trained in their operation.

The wreck
The wreck lies upside down in 223 feet (68 m) of water at 3°33′36″N 104°28′42″E. A Royal Navy White Ensign attached to a line on a buoy tied to a propeller shaft is periodically renewed. The wreck site was designated a 'Protected Place' in 2001 under the Protection of Military Remains Act 1986, just prior to the 60th anniversary of her sinking. The ship's bell was manually raised in 2002 by British technical divers with the permission of the Ministry of Defence and blessing of the Force Z Survivors Association. It was restored, then presented for permanent display by First Sea Lord and Chief of Naval Staff, Admiral Sir Alan West, to the Merseyside Maritime Museum in Liverpool. It is currently traditional for every passing Royal Navy ship to perform a remembrance service over the site of the wrecks.
In May 2007, Expedition 'Job 74',a dedicated survey of the exterior hull of both Prince of Wales and Repulse, was conducted. The expedition's findings sparked considerable interest among naval architects and marine engineers around the world; as they detailed the nature of the damage to Prince of Wales and the exact location and number of torpedo hits. Consequently, the findings contained in the initial expedition report and later supplementary reports were analysed by the SNAME (Society of Naval Architects and Marine Engineers) Marine Forensics Committee, and a resultant paper was drawn up entitled "Death of a Battleship: A Reanalysis of the Tragic Loss of HMS Prince of Wales".This paper was subsequently presented at a meeting of RINA (Royal Institution of Naval Architects)[and IMarEST (Institute of Marine Engineering, Science & Technology) members in London by Mr. William Garzke.
In October 2014, the Daily Telegraph reported that both Prince of Wales and Repulse were being "extensively damaged" with explosives by scrap metal dealers

[EasyEight96]

Ahh the Prince of Wales the ship that sunk in my country... Sad it had to go down that way. Anyway can wait to see more work on it

[Willem]

Interesting that Tamiya have included models of the "Betty's" that sank her.

Looks a good kit out of the box mate.

[Lysus]

[gaz45]

Thanks guys

[gaz45]

Right time to start this
Sanded off the seam line on the bottom of the hull



Cut off the prop shafts with the props and the housings along with the rudder halves wth verty little clean up required



Made them up and attached them to the hull







Next up the 45 cal main guns



As the barrels can be glued in any position it suggests that they were at a 10 degree angle so that is what i did






I also drilled out the barrels



Time for some drilling and some cutting there are the markings on the underside as to where the holes are drilled ( for reference i used a 1.5mm drill)









A little tip when drilling don't drill your fingers

With the holes drilled and the finger patched time to attach the parts to the Aft deck







The way the guns are fitted they are free to rotate





Now for the Fore deck











and the centre deck





I have not as yet fitted the decks to the hull as i am not sure wether to paint them seperatly any suggestions would be appreciated

Next the boat deck





Aft boiler room vents











Just to finish off the day I made up the boats which will be painted prior to fitting
There are
3 25' fast motor boats
2 45' fast motor boats
2 45' motor launches
1 16' fast motor boat
1 14' sailing dingy
1 27' whaler







A dry fit of the boat deck with the boats



That's all for now thanks for taking a look and for your comments

[wavelet]

Great kit, great start!

[AdamLuscombe]

Great start, good luck with the build

[gaz45]

Cheers guys

[martin57]

Oh yeah that's a great looking kit and some nice detail.
Good luck with the rest of your build

[gaz45]

Thanks Martin

[Lysus]

What a beast, I'm glad to see you taking it on and doing so well with it. Making it look to be a trifle

[gaz45]

The parts that have been made up so far got a Ultimate/Badger black primer coat







A dry fit of what I have made up so far





The Launches and the boats for the boat deck were given a Ultimate white primer then top coated with Tamiya XF-2 white and Tamiya XF-20 medium grey





Next up some colour on the hull for this I mixxed up some Tamiya X7 red and XF-9 hull red in a ratio of 2-1 and when that was dry i detail painted the props and the shafts with Tamiya X-12 gold leaf







To finish off today I layed down the deck colour using Tamiya XF-55 deck tan









I am not a ship builder but as I have got this far I realised that maybe i should off attached the cannons after i had painted the decks. We will see I guess it just means the detail painting may be a little harder

[AdamLuscombe]

That all looks great!

[d6mst0]

Well for not being a ship builder you sure seem to have knack for it. Very nice progress you making with it. Looking forward to the next set of photos.

Marcus

[gaz45]

Thanks guys much appreciated

[gaz45]

I have made quite a lot of progress with this so i'll break down the post to smaller posts so as not to bore you all.

The hull has been finished with the upper edge painted with a mix of Tamiya XF-12 JN Grey and XF-2 flat white at a ratio of 1:1











While the hull was drying i made up the stand which was then given a coat of black primer







Next up i built the bridge base





Then primed and painted up with the light grey, medium grey XF-20 and the neutral grey XF-53



While this was drying I attached the boats to the boat deck







For the last part of this section as I had said before I think it was a mistake to glue the cannons to the deck prior to painting which I tried brush painting but this looked really crap so to address this I cut out some masks with some paper so that they could be sprayed

















Which when painted up with the light and neutral grey worked out really well





Then a quick dry fit of the progress so far

[gaz45]

Another day
A little detail painting on the deck with Tamiya XF-56 Metallic grey















Now to build up the bridge 1 and 2









They were then primed and painted in the 2 greys before they were attached together







and again another dry fit to see the progress
These sub assemblies will not be attached to the deck till near the end as suggested in the instructions to make it easier to paint on the camo









The fore boiler room vent and greebles painted and attached









Time for the 2 funnels which after being primed they were painted in the light and medium grey with flat black tops

[gaz45]

Just to end this long post which I apologise for I have made up the 5.25" gun turrets with their barrels set at 15 degrees and the 2 pounder pom poms together with the 5.25" gun range finders















That's all for now thank you for your time and patience and for all your comments they are much appreciated

[AdamLuscombe]

Awesome

[chief5437]

This is looking really good, nice work buddy, I love what you've done so far. I'd like one of these big 1/350 kits, just don't know where I'd put one!

[gaz45]

Cheers guys much appreciated
Not sure where i'm going to put this as yet lol

[gaz45]

To continue with making up the weapons and add most of the remaining parts

The Oerlikons which will be painted up in the light grey and X-10 gun metal





The searchlights again painted in the grey with the lenses in a mix of X-14 sky blue and white



and the anchors



all the above parts painted including the flag poles



A quick look at these parts in position







































The Walrus float plane was made up next and painted light and dark grey and is waiting for a clear coat and the decals









Now to make up the Aftermast and the Foremast











2 more gun range finders





2 Derricks





These were primed and painted up in their respective colours and put in place
As I've said before not a lot of these and the deck itself have not been glued in position as yet as to make it easier to add the camo









Then to finish off the day I made up the 2 japanese bombers G4M1 Type 1 Betty and G3M1 Type 96 Nell.
I'm not sure that I'm going to use these as yet I was thinking of mounting them on some wire and have them approaching the ship if this is the case then I will have the walrus in the take off position instead of it being stowed away.











That is all for now The next update hopfully will see the camo on this.
Thanks for taking a look and for all your comments.

[DBMiller]

Man, that is a lot of little parts!

It's coming along very nicely though!

[haxorb]

I love the aa gun on top of naval cannon, like it's just not enough guns. Great build though!

[chief5437]

Lots of good progress buddy, nice one!

[gaz45]

Thanks guys

[Nev]

That's awesome dude I love the tiny Walrus!

[gaz45]

Cheers mate

[shortCummins]

great build, got me thinking about building some sort of boat as I've never built one before

just one thing, if your going to use the Japanese bombers you'll have to cut the wheels off as they wouldn't go into a bombing run with the wheels down?

rgds
John(shortCummins)

[gaz45]

Cheers mate
now you mention it that would be strange to have the gear down

[gaz45]

Right time to get the camo on this
For this i brush painted it on which took a bit of time

The colors used
XF-8 flat blue XF-1 flat black 4:1
XF-54 dark sea grey XF-55 deck tan 2:1
X-14 sky blue XF-2 flat white 1:2 with just a drop of XF-7 flat red
XF-21 sky XF-2 flat white 2:1
XF-54 dark sea grey XF-2 flat white 2:1

This is how it came out

















When that was all dry it was time to glue down the deck sections







Then glue down the bridge bases so as to continue the camo







and finally for today the walrus is clear coated ready for it's decals

Thanks for taking a lokk and for all your comments

[Les0012]

Can't wait for the final reveal of this build, it looks amazing.

Loving it

Les

[gaz45]

Thanks mate

[Augustus]

This is really impressive. I'd like to do a ship one day but don't know if I'd have the patience.

[gaz45]

Thanks mate

[gaz45]

For this next bit the rigging now here the instructions say to use stretched sprue and i decided to go with the easyline to conform to the scale and to have them all the same thickness which in hind sight was an error on my part as when it came to the vertical rigging it was stretching the horizontal one and looked really horrible.

So with time running out i just went with the horizontal rigging and called it finished.





















So that's it for me I've called it finished
Thank you all for your comments and your encouragement.