GraphicAir A300S D Airbrush Spray Booth Group Buy

[Skullfish]

Thanks skull, I gotta get her full set up. Still choked at the wife for her kibosh on the vent hole

Funny thing with my unit.....with the fan on, I hold that grey tube up to my left ear and the air blows out through my right ear
Is it supposed to do that???

Be ever thankful it's only blowing out yer ear

[Twokidsnosleep]

Thanks skull, I gotta get her full set up. Still choked at the wife for her kibosh on the vent hole

Funny thing with my unit.....with the fan on, I hold that grey tube up to my left ear and the air blows out through my right ear
Is it supposed to do that???

Be ever thankful it's only blowing out yer ear

oh, had a good laugh at that

[ForbesHutton]

Thanks skull, I gotta get her full set up. Still choked at the wife for her kibosh on the vent hole

Funny thing with my unit.....with the fan on, I hold that grey tube up to my left ear and the air blows out through my right ear
Is it supposed to do that???

Now that's a cavity. Sounds like you need a root canal and a cap.

Physician heal thyself...

[digger303]

Thanks skull, I gotta get her full set up. Still choked at the wife for her kibosh on the vent hole

Funny thing with my unit.....with the fan on, I hold that grey tube up to my left ear and the air blows out through my right ear
Is it supposed to do that???

Exploring ALL the possible venting solutions then!

[Matt58]

Well here it is all ready to go slap the stand together with some scrap I had laying around.
Big thanks to Lee for making this happen

[Twokidsnosleep]

That is looking good Matt. Nice and direct, good solution
I awaiting on my Apex airbrush to arrive and house building mojo to increase a bit

[Astaroth]

I finally finished assembling my new bench today. That also means that I can now show the my booth in its final place.
The hose is obviously not attached yet, the vent is right above the booth.

[Twokidsnosleep]

Was that vent there already???
Why am I the only moron with no vent hole

[Astaroth]

Was that vent there already???
Why am I the only moron with no vent hole

Yes, I had it put there during construction. The decision to get this booth had been made long before I started planning the house, so it was a no-brainer to put that vent in.

[Skullfish]

Yes, I had it put there during construction. The decision to get this booth had been made long before I started planning the house, so it was a no-brainer to put that vent in.

don't tell Scott that!

[Twokidsnosleep]

No brainer indeed
I am gonna rent a big bloody auger and drill my own GD hole in the wall...that will show her

[Fridgy]

No brainer indeed
I am gonna rent a big bloody auger and drill my own GD hole in the wall...that will show her

Omg please do it.....

And post the results in the modelling mishaps thread..... you have such a way with the written word.....

[Astaroth]

No brainer indeed
I am gonna rent a big bloody auger and drill my own GD hole in the wall...that will show her

You could do that. It's just a hole with a pipe in it.

[Astaroth]

Yes, I had it put there during construction. The decision to get this booth had been made long before I started planning the house, so it was a no-brainer to put that vent in.

don't tell Scott that!

Ooops

[Twokidsnosleep]

HOME Depot today, I looked at metal dryer vents to hook my tube up to.
Problem is open window is the only option as she won't let me punch through the wall
Last night was raining and blowing stupidly.....who wants a window open then??
I may have to relent and put the spray stuff downstairs in the workshop where I did get the wall vent....and planned to make a spraybooth.
I can't really blame her as my original plan was to have just the downstairs space, not a second upstairs one in a spare room. Then things morphed into my workshop becoming the storage and staging room for everything... so I set up models upstairs.
First world problem not worth stressing over.

[digger303]

HOME Depot today, I looked at metal dryer vents to hook my tube up to.
Problem is open window is the only option as she won't let me punch through the wall
Last night was raining and blowing stupidly.....who wants a window open then??
I may have to relent and put the spray stuff downstairs in the workshop where I did get the wall vent....and planned to make a spraybooth.
I can't really blame her as my original plan was to have just the downstairs space, not a second upstairs one in a spare room. Then things morphed into my workshop becoming the storage and staging room for everything... so I set up models upstairs.
First world problem not worth stressing over.

Whats the window like. Can you make a filla panel with the vent in it to seal the open window. That can be removed when you want.

[modeller]

As I installed my vent my timber modelling shed it was relatively easy to add the hole... however my daughters decided it look ugly poking out the side so wanted to disguise it.... this was their response.

[Twokidsnosleep]

Oh that is absolutely hilarious
I love it. Those little silly things that make a house your home
You are gonna chuckle at that when you walk by for many years
Well done on your family

[RobBye]

Scott, I went with a removable window insert for my situation.



Two plies of hardboard, with an exhaust port fitting purchased from a dealer in woodworking machinery. The 45 degree angle of the fitting keeps airflow turbulence to a minimum. If you have the right style of windows, a removable solution like this might work for you.

[Twokidsnosleep]

Scott, I went with a removable window insert for my situation.



Two plies of hardboard, with an exhaust port fitting purchased from a dealer in woodworking machinery. The 45 degree angle of the fitting keeps airflow turbulence to a minimum. If you have the right style of windows, a removable solution like this might work for you.

You have a slider window, mine is a crank...still could work and certainly an option
I appreciate the photo as it helps me visualize a solution

I am hoping after the city has signed off on everything I can pop a vent through. I think the real frustration is I looked at it and so easily could have done it in the construction phase. I had it at the framing and plywood stage and was thinking to make it, but didn't press the argument. Now there are a lot more layers to go through to retro fit it

[DougvH]

Dang, guess i found the site a little too late

[digger303]

Not if you can get another 10 guys together, it might be possible. You can but try.

[woody1968]

Is this still open

[MAZ62]

I'm in the hunt for an A300SD and would definitely be interested in another group buy ...

[Lee]

Is this still open

I'm in the hunt for an A300SD and would definitely be interested in another group buy ...

If we can get another ten people interested, I'll do another one

[RobBye]

I wouldn't let this deal pass me by a second time. I'm interested.

[jollyrogertomcat]

Missed out the first time, in for another try.

What"s on the bench, making up for lost time 2 F-15 Eagles, 2 f-15 Strike Eagles,2 F-4 Phantoms, 3 A-6 Intruders

[MAZ62]

I make that 5 interested already? Looking like 10 is going to be possible then.

[CaptKilljoy]

I would be interested if this were to happen.

[MAZ62]

Due to lack of interest I went hunting for the best price for a direct purchase and managed to order yesterday for £248 which looks close or even better than the group price... already on route for Tuesday delivery

[KimAndersen]

i'm in and thanks for great show you and poul are doing so very helpful.
Regards from Denmark.

[Vindicare]

Also interested cou t me in.

[Lee]

Also interested cou t me in.

i'm in and thanks for great show you and poul are doing so very helpful.
Regards from Denmark.

I would be interested if this were to happen.

I make that 5 interested already? Looking like 10 is going to be possible then.

Missed out the first time, in for another try.

What"s on the bench, making up for lost time 2 F-15 Eagles, 2 f-15 Strike Eagles,2 F-4 Phantoms, 3 A-6 Intruders

I wouldn't let this deal pass me by a second time. I'm interested.

Is this still open

Dang, guess i found the site a little too late

Have started a new group buy for this - We need at least ten - Be sure to put your name down on the new thread, which you can find here.........viewtopic.php?f=570&t=23352

[KimAndersen]

i'm in and thanks for great show you and poul are doing so very helpful.
Regards from Denmark.

Now you started a new Group Buy will we still get 15% off the price.

[Vindicare]

yay \o/

[Lee]

Now you started a new Group Buy will we still get 15% off the price.

yay \o/

Yes, but you need to get your names down on the new thread

viewtopic.php?f=570&t=23352