H-21C Flying Banana 1/72 Italeri

Post your build progress here :)

Moderator: T3hGuppy

Post Reply
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

OK, fine! I guess I will join this build. ;) LOL I was torn and the Banana was suggested. So I will go with that. Being a USAF guy, I of course want to do one of theirs. I found and after market set of decals that I will be ordering Fri. Otherwise it would be the blue French one. A blue banana just sounds interesting. LOL So while I await the decals and finish the F-5 I am doing, here is some info on this interesting copter from the Wikapedia.

Piasecki Helicopter designed and successfully sold to the United States Navy a series of tandem rotor helicopters, starting with the HRP-1 of 1944. The HRP-1 was nicknamed the "flying banana" because of the upward angle of the aft fuselage that ensured the large rotors did not strike each other in flight. The name would later be applied to other Piasecki helicopters of similar design, including the H-21.

In 1949, Piasecki proposed the YH-21 Workhorse to the United States Air Force (USAF), which was an improved, all-metal derivative of the HRP-1. Using two tandem, fully articulated three-bladed counter-rotating rotors, the H-21 was powered by one nine-cylinder Curtis-Wright R-1820-103 Cyclone supercharged 1,150 hp (858 kW) air-cooled radial engine.

After the first flight of the YH-21 on 11 April 1952,[1] the USAF ordered 32 H-21A SAR models and 163 of the more powerful H-21B assault transport variant. The H-21B was equipped with an uprated version of the Wright 103 engine, developing 1425 shaft horsepower (1063 kW), and featured rotor blades extended by 6 inches (152 mm). With its improved capabilities, the H-21B could carry 22 fully equipped infantrymen, or 12 stretchers, plus space for two medical attendants, in the medevac role. With its Arctic winter capabilities, the H-21A and H-21B were put into service by both the USAF and the Royal Canadian Air Force (RCAF) to maintain and service DEW (Distant Early Warning) radar installations stretching from the Aleutian Islands and Alaska across the Canadian Arctic to Greenland and Iceland.

In 1952, some H-21As were evaluated by USMC helicopter squadron HMX-1 in the air assault role.[2] In 1957, an H-21B was loaned to the United States Marine Corps (USMC) to evaluate the helicopter as an airborne tug to tow disabled landing ships and amphibious landing vehicles to the beach. During the evaluation, the H-21B towed an LST at 5 knots and a simulated tracked amphibious vehicle from the water to the beach.[3] The uprated 1425 hp Wright engine used in the H-21B was also used in subsequent variants sold to both the U.S. Army (as the H-21C Shawnee) and the military forces of several other nations. In 1962, the H-21 was redesignated the CH-21 in U.S. Army service.

In 1959 Vertol Aircraft, the new name for Piasecki Helicopters, came up with a concept for heavy lift over short distances where between two and six H-21Bs would be linked by beams to lift heavy loads. It was considered to be unsafe, because if one helicopter had mechanical problems during the lift it could cause an unbalanced situation and cause all helicopters to crash.

Image

Image
Last edited by smokeriderdon on Wed Jan 01, 2020 3:18 pm, edited 1 time in total.
Image
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

Cool ! :th: :th: :cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
KalebB
Command Sergeant Major
Command Sergeant Major
Posts: 934
Joined: Thu Feb 06, 2014 6:01 am
Location: Southern Indiana, USA
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by KalebB »

Now that, is a hell of an aircraft :lol:

Can't wait to see the build thread on it bud :th:
"This is Jack Burton in the Pork Chop Express, and I’m talkin’ to whoever’s listenin’ out there" ~ Jack Burton

On the Bench
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

Awesome
I triple dirty dog dare ya to paint it yellow with brown spots :D :tongue:
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

I triple dirty dog dare ya to paint it yellow with brown spots :D :tongue:
LMAO I actually gave that considerable thought. With some minion figures...
Image
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

Image

Great to have you onboard mate :cheers2: looking forward to seeing this all come together :)
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
User avatar
Stokesy44
Major General
Major General
Posts: 8688
Joined: Thu Jun 18, 2015 10:13 am
Location: The Midlands, UK
Great Britain

Re: H-21C Flying Banana 1/72 Italeri

Post by Stokesy44 »

Cook subject.

Looks like it got broke in the factory and nobody noticed! ;)
Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

Don, I found the perfect avatar for you while you build this.....
Image
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

Twokidsnosleep wrote: Thu Dec 19, 2019 12:43 am Don, I found the perfect avatar for you while you build this.....
Image
Image
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

Tomcat64 wrote: Thu Dec 19, 2019 11:18 am
Twokidsnosleep wrote: Thu Dec 19, 2019 12:43 am Don, I found the perfect avatar for you while you build this.....
Image
Image
Someone is heading for a spanking..... :lol: :lol:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
bfrd
Site Admin
Site Admin
Posts: 1943
Joined: Tue Aug 01, 2017 11:43 am
Location: Carrollton, TX
Contact:
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by bfrd »

Images are broken... :(
Matthew (or Bifford if you prefer)
Stash
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

bfrd wrote: Thu Dec 19, 2019 12:20 pm Images are broken... :(
That's strange - they're showing up fine for me... :think:

Edit: Ooops no - you're right - the kit images have all disappeared - they were ok yesterday... although I think I heard somewhere that PhotoBucket was having a wobbler so maybe that's related
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

Thank god my banana picture still survives :D
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

digger303 wrote: Thu Dec 19, 2019 12:14 pm
Tomcat64 wrote: Thu Dec 19, 2019 11:18 am
Twokidsnosleep wrote: Thu Dec 19, 2019 12:43 am Don, I found the perfect avatar for you while you build this.....
Image
Image
Someone is heading for a spanking..... :lol: :lol:
Yah probably me coz I nicked Scott's own meme and played it back at him!!
Image
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
User avatar
DBMiller
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2263
Joined: Mon Jan 06, 2014 8:10 pm
Location: Guilford, Vermont, USA
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by DBMiller »

Tomcat64 wrote: Thu Dec 19, 2019 11:18 am
Twokidsnosleep wrote: Thu Dec 19, 2019 12:43 am Don, I found the perfect avatar for you while you build this.....
Image
Image
Allow me to add my face palm to yours.
ON THE BENCH: Do I have to say? :(
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

DBMiller wrote: Thu Dec 19, 2019 5:39 pm
Tomcat64 wrote: Thu Dec 19, 2019 11:18 am
Twokidsnosleep wrote: Thu Dec 19, 2019 12:43 am Don, I found the perfect avatar for you while you build this.....
Image
Image
Allow me to add my face palm to yours.

What'd I do?????
I didn't do nothing
Image
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

LMAO I am severely tempted to use that.

Yeah, photobucket is toast at the moment. I was gonna load some pics to do a minor update, but cant even get the site to come up.
Image
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

smokeriderdon wrote: Fri Dec 20, 2019 3:23 am LMAO I am severely tempted to use that.

Yeah, photobucket is toast at the moment. I was gonna load some pics to do a minor update, but cant even get the site to come up.
yeah and they sent a letter around saying they lost money this last year and ant people to upgrade to the pro version at 25% off.
Also a price rise next year is the gist of it.
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
Stokesy44
Major General
Major General
Posts: 8688
Joined: Thu Jun 18, 2015 10:13 am
Location: The Midlands, UK
Great Britain

Re: H-21C Flying Banana 1/72 Italeri

Post by Stokesy44 »

Twokidsnosleep wrote: Thu Dec 19, 2019 5:51 pm
DBMiller wrote: Thu Dec 19, 2019 5:39 pm
Tomcat64 wrote: Thu Dec 19, 2019 11:18 am
Image
Allow me to add my face palm to yours.

What'd I do?????
I didn't do nothing
Image
Couldn't resist

Image
Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

Twokidsnosleep wrote: Thu Dec 19, 2019 5:51 pm What'd I do?????
I didn't do nothing
Image
Image
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

OK. The decals are ordered. I have been checking pics to see what the interior looked like. I have settled on interior green with medium-ish gray floor. OD seats with red backs.

Image

For the exterior, the decals call out aluminum and florescent red orange. The color I used on my H-34. Which is fine, BUT...the only color pics with the same markings but different tail number that I can find is the single one I have in the album. And that CLEARLY is a funky red. And other USAF H-21s from different squadrons also have that same funky red. And even the pic of the real copter with the decal set looks more red than orange to me.

Image

So what do you all think? And does the aluminum look more painted than BM? Im thinking painted. I have pretty much settled on using simple rattle can Tamiya silver. Unless there is a better suggestion.


Image


Next. Is that a fuel tank slung under it in the B&W pic????? I was told it is on another board. Thinking a wingtip tank from an F-94 or the like would work. Thoughts there?
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

And now I sit here with a tear in my eyes. I made the post then went looking for more pics. I stumbled across one painted in the blue and white of the USAF 1001st. It was kind of familiar, and the squadron number screamed at me. After doing a minor amount of clicking I found this site:

http://usafhpa.org/1001st/1001st.html

The reason for the tears? My father was a CMSGT and was in the 1st Heli as a flight mechanic on Andrews AFB from about 1970 on. He was one of the Air Forces premier NCOs and flight mechs and helped to write the tech manuals for the Hueys and H-3s. This was the original 1st heli. At the bottom of the page you will see that the 1001st was moved from Bolling and re designated the 1st. I did not know this. So this is history directly related to my dad. My father passed away on 16Dec12.
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

So I dove in after all that.

Started with the floor. I took 1000 grit sandpaper and cut it for the walkway area that has the non skid surface. I dont know why I hadnt thought of this before now. I think it worked great. Yes, its raised a bit, but I will take that given it looks pretty damn good IMO.

Image

The interior walls sprayed and windows put in.

Image

Then the cock pit stuff put on and some weathering.

Image

Image

Image

Image
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

So I got all the interior stuff done. Seats and such. It all looks really good. And you have to believe me because my dumb ass failed to take any pics before I closed it up.But here is a pic of it taped together while the Tamiya thin sets. Fit was really good though the panel lines dont match up towards the front. The fron glass is just sitting in place for the pic. Have to mask it before I glue it in place.

Image
Image
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

Great to see you getting stuck in mate, and a wonderful tribute to your Dad too :cheers2:
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
User avatar
Kevthemodeller
Lieutenant Colonel
Lieutenant Colonel
Posts: 5797
Joined: Sat Mar 26, 2016 8:31 am
Location: Newton Abbot UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Kevthemodeller »

Off to a great start there mate :th:
Kev

On the bench:
:think:
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

comes together well :th: :th: :cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

OK, since part of this is supposed to be like educational and stuff, I figured I would give a sort of tutorial on using Parafilm to mask canopies. Because I know everyone just loves doing that.

Parafilm is semi clear film that is almost like stretchy wax plastic kind of stuff. (That is industry technical talk right there) Its made for use in labs to seal jars and test tubes and the like. It is not an adhesive, so it does not pull paint or leave scuz behind. It is awesome stuff.

Image

Image

To start, cut a piece off the roll that will cover the part with extra.

Image

Then gently start stretching it by pulling on opposite sides. You will have to do it in small sections. It took me a few tries to get the hang of it.

Image

Pick a side on the part, tuck some around the edge, then start stretching it across the part. Get it as snug as you can. Tuck the excess around all the edges. Use your thumbs to press the film down. I often use a toothpick to press it into the edges of the framing.

Image

Image

Image

At this point, remove the excess by running a blade around the edges. Be careful not to cut the part.

Image

Once that is done, take a fresh blade and cut around the framing.

Image

Remove the film covering the framing. You will likely pull up the stuff on the window portions some. Just press it back down with a toothpick. Then check for spots where you didnt cut correctly and use a liquid masking product to fill in.

Image

Image

Once the masking fluid dries, you can attach the part and paint away. I shot gloss black for primer.

Image

Hope this helps folks to try something different, and IMO a much easier thing to use than tape.
Image
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

smokeriderdon wrote: Thu Dec 26, 2019 10:38 pm OK, since part of this is supposed to be like educational and stuff, I figured I would give a sort of tutorial on using Parafilm to mask canopies. Because I know everyone just loves doing that.

Parafilm is semi clear film that is almost like stretchy wax plastic kind of stuff. (That is industry technical talk right there) Its made for use in labs to seal jars and test tubes and the like. It is not an adhesive, so it does not pull paint or leave scuz behind. It is awesome stuff.

Image
Image
hope this helps folks to try something different, and IMO a much easier thing to use than tape.
Thanks for the tip. I have some of that somewhere I bought on a recommendation, but never used.
How much do you need to stretch it before application ? Can it be over stretched ?
:cheers2:
Last edited by digger303 on Fri Dec 27, 2019 1:28 pm, edited 1 time in total.
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

It certainly can be over stretched. If it's too thin it's not gonna protect well. I would say double the size you start at the most. I may do a video showing how I do it.
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

Slight update. I ordered both the international orange and stop light red. I am going to go with the red, but figured having the int orange on hand cant hurt. I sprayed the Tamiya Silver from a rattle can. That was a disaster. As soon as it hit it did that crinkling thing. I have no freaking clue why. So now I am cleaning that mess up. *sigh* I have to wait for the red anyway, but sheesh.
Image
User avatar
digger303
General
General
Posts: 16305
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: H-21C Flying Banana 1/72 Italeri

Post by digger303 »

Sorry to hear that, what a pain in the butt. I hate that when it's all together and you start to paint and it all goes wrong. :(
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

digger303 wrote: Sun Dec 29, 2019 11:16 pm Sorry to hear that, what a pain in the butt. I hate that when it's all together and you start to paint and it all goes wrong. :(
And it has really become a mega pain.
Image
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

Wish I stole some of that Parafilm when I worked in the lab...stuff is expensive now!
I have used Frisket which is similar and art store supplied so a bit less pricey

Keep at the chopper she is coming along :thumb2:
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
User avatar
Tomcat64
Brigadier General
Brigadier General
Posts: 7157
Joined: Thu Sep 22, 2016 3:24 pm
Location: Swindon, UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Tomcat64 »

Thanks for the mini-tutorial on parafilm - I've seen several articles where the author has used that for masking but hadn't worked up to giving it a try as yet, but might give it a go now.

Hope you get the paint snafu cleaned up ok.
Cheers, Neil

On the Bench:
Revell 1/72 Millennium Falcon - stalled due to stupidity
Tamiya 1/35 Stegosaurus Stenops
Tamiya 1/35 Sherman Firefly VC
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

Twokidsnosleep wrote: Mon Dec 30, 2019 4:23 am Wish I stole some of that Parafilm when I worked in the lab...stuff is expensive now!
I have used Frisket which is similar and art store supplied so a bit less pricey

Keep at the chopper she is coming along :thumb2:
Well, I have had that roll for at least 3 years now. The big roll like that is about 40 bucks. Considering how much there is and that it will likely be the only time you have to buy it, its not bad.
Tomcat64 wrote: Mon Dec 30, 2019 2:53 pm Thanks for the mini-tutorial on parafilm - I've seen several articles where the author has used that for masking but hadn't worked up to giving it a try as yet, but might give it a go now.

Hope you get the paint snafu cleaned up ok.
You really should give it a go. I cant stress enough much better i is than tape. Only thing better are pre cut masks.

As for the build. I went by the hobby store after work. I have traffic light red coming bt I like the brake light red better for this. Get home and get her all taped up annnnnnd... its a clear color. More like a glaze. I have to presume the traffic light will be the same. &%&$@!#^*()& ;) After much cursing, I decided to simply go with Testors dark red. Its not a bad choice and once I get it a bit dirty it should look good. It will sit for a couple days and then I need to touch up spots I jacked up along the way.

Image
Image
User avatar
Kevthemodeller
Lieutenant Colonel
Lieutenant Colonel
Posts: 5797
Joined: Sat Mar 26, 2016 8:31 am
Location: Newton Abbot UK
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Kevthemodeller »

Really getting there now mate :th:
Kev

On the bench:
:think:
User avatar
Quax
Warrant Officer
Warrant Officer
Posts: 1330
Joined: Thu Feb 26, 2015 9:52 am
Location: Andover, Hampshire
Greenland

Re: H-21C Flying Banana 1/72 Italeri

Post by Quax »

Definitely beginning to look the part, keep at it as its going to look great!

Paul
Paul :hi: (not THE Paul a more inconsequential Paul)

On the bench:
A mess as usual...
now residing in the Peoples Democratic Republic of Penguinland - long live the Emperor!
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

Kevthemodeller wrote: Tue Dec 31, 2019 10:35 am Really getting there now mate :th:
Quax wrote: Tue Dec 31, 2019 5:10 pm Definitely beginning to look the part, keep at it as its going to look great!

Paul
Thank you gentlemen! As my NYE plans have been shot straight to hell, I will be working on her tonight.
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

Oh holy dear Lord baby Jesus these decals! They are wrinkling, folding and just generally not cooperating at all. And the colors could be a bit more opaque. And you will notice that the checker markings are one long strip with no holes. I have to go and cut out each window. Got the first one done, but just barely. I need to let them dry out COMPLETELY and stick to the surface. I placed the props on just for the pic.


Image
Image
User avatar
Twokidsnosleep
General
General
Posts: 18293
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: H-21C Flying Banana 1/72 Italeri

Post by Twokidsnosleep »

It is looking great, keep at it
White and black checker decals are easy to touch up paint if you have it rip or tear a bit when you cut the window
We will never even notice

Happy New Year to you
Scott

On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
Hawkmoon
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2121
Joined: Fri Mar 01, 2019 7:19 pm
England

Re: H-21C Flying Banana 1/72 Italeri

Post by Hawkmoon »

:thumb2: She is looking the bizz though and nice work :th:
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

Thank you gentlemen!

It was pointed out to me that in the reference pics, there is white trim around the windows that is not present in the decals. So thats a true strike against them and not much I can do about it.
Image
smokeriderdon
Command Sergeant Major
Command Sergeant Major
Posts: 827
Joined: Tue Feb 06, 2018 11:18 pm
United States of America

Re: H-21C Flying Banana 1/72 Italeri

Post by smokeriderdon »

OK, so let just say I will NOT be buying Print Scale decals again. These things are atrocious. They do not adhere. It requires multiple multiple applications of Micro Sol and or Solva set to get them to maybe stay down. We will see.

I was cutting the window portions of the right side checker decal. Got the second window done. I blew on it to get little bits off. Mind you, I had micro soled it TWICE yesterday and left it to sit for 24 hours. When I blew on it, half of it blew up off the model ad twisted into a unrescuable mess. The walkway on top also blew off, but managed not to twist up. That required another 2 applications of micro sol AND one of solva set to finally stay down. The checker strip was toast. Sooooo...

Command decision time. Just leave it without the checkerboard down the fuselage, or order yet another set and still have the same issues. I thought maybe I could make a template to pre cut the windows, but then these flimsy ass things would just fold onto themselves even worse than before. So I decided that it would just have to be without that feature. The decals were inaccurate anyway. And it looks good as is. I did not even try to use the stencils.

I did venture into the spares bin to find some fuel tanks or something close. I did find a couple tank looking things. Could be bombs, not sure. The sprue didnt have the ID tab so not sure what they came from. But they look close. So I will fiddle with those and see if I can figure how to hang them. But for now, I am gonna call her done. I will add pics to the completed thread if I work the tanks out.

Image
Image
User avatar
RangerNeil
Captain
Captain
Posts: 4582
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: H-21C Flying Banana 1/72 Italeri

Post by RangerNeil »

Looks excellent in the photo - despite the decal issues it's turned out extremely well. Yet again I am truly impressed!!
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hobby Boss 1/350 Surcouf
    Hobby Boss 1/350 Soviet Alfa class
    Hobby Boss 1/350 USN Los Angeles
    Mikro Mir 1/350 HMS M1


    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    smokeriderdon
    Command Sergeant Major
    Command Sergeant Major
    Posts: 827
    Joined: Tue Feb 06, 2018 11:18 pm
    United States of America

    Re: H-21C Flying Banana 1/72 Italeri

    Post by smokeriderdon »

    RangerNeil wrote: Thu Jan 02, 2020 3:13 pm Looks excellent in the photo - despite the decal issues it's turned out extremely well. Yet again I am truly impressed!!
    Thank you kindly sir!
    Image
    User avatar
    bfrd
    Site Admin
    Site Admin
    Posts: 1943
    Joined: Tue Aug 01, 2017 11:43 am
    Location: Carrollton, TX
    Contact:
    United States of America

    Re: H-21C Flying Banana 1/72 Italeri

    Post by bfrd »

    It sure looks awesome sitting on that base!
    Matthew (or Bifford if you prefer)
    Stash
    smokeriderdon
    Command Sergeant Major
    Command Sergeant Major
    Posts: 827
    Joined: Tue Feb 06, 2018 11:18 pm
    United States of America

    Re: H-21C Flying Banana 1/72 Italeri

    Post by smokeriderdon »

    bfrd wrote: Thu Jan 02, 2020 11:29 pm It sure looks awesome sitting on that base!
    Thanks! That base was meant for another project, but I figured until I use it, it will work great for pics of any 1/72 stuff I do.
    Image
    Post Reply

    Return to “Build threads”