Swann Morton Scalpels
- eightfooticeman
- First Sergeant

- Posts: 581
- Joined: Sat Nov 02, 2013 1:39 am
- Location: Woodbridge Virginia, USA

Swann Morton Scalpels
Can anyone tell me any benefits they have experienced using a scalpel over an X-acto knife? Perhaps weight or feel in hand over the traditional round barreled handles. 
Jermaine
On The Bench:1/12 Tamiya Honda NSR 500 Kit 14099
Ideas: ?
On Hold:1/48 Revell F-15E
On The Bench:1/12 Tamiya Honda NSR 500 Kit 14099
Ideas: ?
On Hold:1/48 Revell F-15E
- Lego
- Command Sergeant Major

- Posts: 918
- Joined: Fri Nov 08, 2013 6:16 pm
- Location: Ireland

Re: Swann Morton Scalpels
The quality of the blades are the same imo, but I can get a box (100) of swann blades off ebay for €10. 
“Never argue with an idiot. They will drag you down to their level and beat you with experience.”
- Donkeywalloper
- Chief Warrant Officer 4

- Posts: 2619
- Joined: Sun Apr 13, 2014 8:06 pm
- Location: Burton upon Trent

Re: Swann Morton Scalpels
Hi Eightfoot
I have used both items 30 years ago and now coming back in to hobby. I have big hands and you would have thought an Xacto would be easier to wield....
I actually use the scalpel much more as it feels more precise. The blades are as cheap as chips so swapping blades never worries much cost wise. They are sharp as hell (as m fingers can testify and especially if I don't remeber to put cork on end and grab for item in pot
The only drawback is the blades do tend to bend on scalpels when placing pressure on them (tendency to dance and wobble as you cut harder items or put pressure down). But for clearing flash and trimming they are the tops.
Keep safe
John
I have used both items 30 years ago and now coming back in to hobby. I have big hands and you would have thought an Xacto would be easier to wield....
I actually use the scalpel much more as it feels more precise. The blades are as cheap as chips so swapping blades never worries much cost wise. They are sharp as hell (as m fingers can testify and especially if I don't remeber to put cork on end and grab for item in pot
The only drawback is the blades do tend to bend on scalpels when placing pressure on them (tendency to dance and wobble as you cut harder items or put pressure down). But for clearing flash and trimming they are the tops.
Keep safe
John
Bench:1/35 HobbyBoss Nagmachon with oodles of Aftermarket
Completed: Vespid 1/72 Comet A10
Shelf: Lots (82 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo
Completed: Vespid 1/72 Comet A10
Shelf: Lots (82 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo
- Rob
- Chief Warrant Officer 2

- Posts: 1892
- Joined: Thu Aug 29, 2013 5:02 pm
- Location: Kent, UK
Re: Swann Morton Scalpels
The S-M Retractaway handle does away with the need for the cork!Donkeywalloper wrote:Hi Eightfoot
I have used both items 30 years ago and now coming back in to hobby. I have big hands and you would have thought an Xacto would be easier to wield....
I actually use the scalpel much more as it feels more precise. The blades are as cheap as chips so swapping blades never worries much cost wise. They are sharp as hell (as m fingers can testify and especially if I don't remeber to put cork on end and grab for item in pot![]()
The only drawback is the blades do tend to bend on scalpels when placing pressure on them (tendency to dance and wobble as you cut harder items or put pressure down). But for clearing flash and trimming they are the tops.
Keep safe
John
I too prefer the shape of the S-m type handles over the round xacto ones. Blades are easier to get in bulk too
My Youtube Channel: http://m.youtube.com/user/MrBobsBuilds
- Donkeywalloper
- Chief Warrant Officer 4

- Posts: 2619
- Joined: Sun Apr 13, 2014 8:06 pm
- Location: Burton upon Trent

Re: Swann Morton Scalpels
Thanks RobRob wrote:The S-M Retractaway handle does away with the need for the cork!Donkeywalloper wrote:Hi Eightfoot
I have used both items 30 years ago and now coming back in to hobby. I have big hands and you would have thought an Xacto would be easier to wield....
I actually use the scalpel much more as it feels more precise. The blades are as cheap as chips so swapping blades never worries much cost wise. They are sharp as hell (as m fingers can testify and especially if I don't remeber to put cork on end and grab for item in pot![]()
The only drawback is the blades do tend to bend on scalpels when placing pressure on them (tendency to dance and wobble as you cut harder items or put pressure down). But for clearing flash and trimming they are the tops.
Keep safe
John
I too prefer the shape of the S-m type handles over the round xacto ones. Blades are easier to get in bulk too
The link for the retractable handle was great (ordered).
The bloodied cork can be binned
Bench:1/35 HobbyBoss Nagmachon with oodles of Aftermarket
Completed: Vespid 1/72 Comet A10
Shelf: Lots (82 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo
Completed: Vespid 1/72 Comet A10
Shelf: Lots (82 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo


