Page 1 of 1

DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 12:00 am
by chief5437
Hi fellas!

calling this done. after a good while with no mojo, i wanted to start the new year with a gentle start. i decided that id build this oob, other than the paintwork, and just let things slide and enjoy the build.

all went swimmingly, until i started making stupid mistakes! i left car polish in panel lines, then put clear coats on, forgetting to clean said polish off first! i changed body colour half way through after already painting and installing the interior. i fitted the glazing without cleaning my greasy fingerprints from the inside. i fitted the body without cleaning the dust off the interior. i discovered overspray and paint spots all over, after i had clear coated the bodywork. i cracked the decals after gloss coating....

the list is endless, lol!

however, i stuck to my guns, and didnt let it get my down too much, and soldiered on. tbh, i was starting to lose interest, im really not a car guy. but im looking forward to some of the upcoming gb's/sig's, so i had to get it finished.

the kit itself is pretty good, its huge! im sure it could be made better by a more patient build. my only gripes with the kit are....

not being able to angle the front wheels.
no door windows
vague fitting of quite a few parts. ie. no locating pins or sloppy fit.

anyway.... enough of my drivel, heres the damage.

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr


i actually like the colour on this pic, the way it changes for light to darker orange. just a shame it shows up all the dust i failed to clean off before putting the body on, lol!!

ImageUntitled by rich applegarth, on Flickr

ImageUntitled by rich applegarth, on Flickr


and this shows why i dont build cars for a living, the wheel fell off, lol!!

ImageUntitled by rich applegarth, on Flickr

well, there you have it, not a very good finish for the first gb of the year, but its still a finish. and more importantly, i still have a hunger to get building again. roll on the next gb!!

thanks for looking guys! :cheers2:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 7:10 am
by OlaHansson
Looks great!!! :th:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 9:13 am
by Stokesy44
Looks pretty good to me mate. Love that US muscle car look. :clap: :clap:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 11:05 am
by Paul
Looks good to me mate. Nice work

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 5:26 pm
by Twokidsnosleep
Looks GREAT :thumb2: :banana: :banana: :banana:
The orange/black scheme is striking as heck

Wheel fall off is Ford engineering
Now if you can only get the passenger foot well to leak from a plugged cabin air filter it will be 100% accurate...ask how i know :whistle: :D

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 5:40 pm
by chief5437
Twokidsnosleep wrote: Wed Feb 14, 2018 5:26 pm Looks GREAT :thumb2: :banana: :banana: :banana:
The orange/black scheme is striking as heck

Wheel fall off is Ford engineering
Now if you can only get the passenger foot well to leak from a plugged cabin air filter it will be 100% accurate...ask how i know :whistle: :D
Ha ha!! I could drill a hole in it I suppose?

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Wed Feb 14, 2018 6:13 pm
by Twokidsnosleep
chief5437 wrote: Wed Feb 14, 2018 5:40 pm
Twokidsnosleep wrote: Wed Feb 14, 2018 5:26 pm Looks GREAT :thumb2: :banana: :banana: :banana:
The orange/black scheme is striking as heck

Wheel fall off is Ford engineering
Now if you can only get the passenger foot well to leak from a plugged cabin air filter it will be 100% accurate...ask how i know :whistle: :D
Ha ha!! I could drill a hole in it I suppose?
I was going to ask what the pos at the end of the title stood for, but I really do know ;)
You did a fantastic job with a kit and situations that fought you along the way :thumb2:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Thu Feb 15, 2018 9:32 am
by Tomcat64
Great result mate! :clap:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Thu Feb 15, 2018 2:37 pm
by DrSprue
Great work! :th:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Thu Feb 15, 2018 10:40 pm
by gaz45
Awesome work there mate love the paint job

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Sat Feb 17, 2018 3:02 am
by NorthernModeller
Damn, that is a mean machine, Looks awesome. Well done for finishing :)

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Sat Feb 17, 2018 11:09 am
by exmoor
Nice work looks great love the orange

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Sun Feb 18, 2018 12:14 pm
by demarcation
Great work! Really love the color combo :th:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Fri Jun 01, 2018 9:04 pm
by Arnie3
Looks wicked :cheers2:

Re: DONE! Chiefs Revell 1/12 Shelby GT500 pos

Posted: Mon Jun 04, 2018 7:39 am
by kiwigav
Nice work mate :th: